A design change in the choice of window glass during the recent building of a luxury yacht (designed by a top sports car manufacturer) has been solved by Belzona. The window profiles, which with had already been built, were not compatible with the glass thickness. Lower thickness of glass required greater thickness of the metal window profile. A material would need to be able to be applied at a thickness of 1 – 1.5 cm (0.39 – 0.59 in) on to vertical frames.
The application needed to take place inside the 135ft/41.1m catamaran design. The $58 million craft features 472 square meters of interior space, accommodating 10 passengers and 10 crew members. There were 2 major affected zones in need of a solution. One of which was 148 linear metres long with a width of 5cm. The other being 68 metres long with a width of 10cm.
A solution was needed that would be capable of building up vertical surfaces to the required thickness without sagging. Traditional welding repair methods were considered but had a potential of damaging wood furnishings and interiors near the windows, as well as being very expensive. Other work on the yacht was also taking place at the same time, meaning lack of space had to be considered. Therefore, the nature of welding would not have been suitable.
The customer turned to cold-applied metal rebuilding options. Materials from several manufacturers were considered and the decision was made based on slump resistance, as some vertical surfaces needed to be built up to 2.5cm.
Belzona 1121 (Super XL-Metal), a multi-purpose durable repair composite, was selected for the metal rebuilding. This would offer the use of moulds being a 100% solids epoxy material.
The surface of the window profiles were initially prepared using a hand tool. As mentioned before, precisely measured formers needed to be created for the alignment of the windows. Wooden formers were cut out, with Belzona 9411 (Release Agent) being applied for later removal once the material had cured. The material was worked into the surface of the former for a smooth finish. The material was then built up to achieve the correct thickness. The former with the material was then applied directly to the surface of the window profiles and pressed with clamps to ensure the best possible finish. Once cured, the formers were then removed and lightly abraded for an optimum finish.
The exact dimensions and geometry of the window profiles needed were able to be achieved, which was the fundamental part of the application, allowing the window glass to be fitted. The application was also able to be completed within the given deadline.
This unique example illustrates a very common problem in a wide range of industries. Cold curing epoxy composites for metal rebuilding solutions are easy to apply, require no hot work and dramatically reduce downtime.